GRASS VALLEY Encore, Руководство по настройке

Страница: 179 / 426

Encore — Configuration Manual 179
Naming Conventions
Seven or Eight Character Names
Limiting names of Sources, Destinations, Levels, Salvos, Areas, control
panels and other names intended for display on Encore hardware panels to
7 or 8 characters is strongly recommended. Names longer than 8 characters
will be truncated and the extra characters will not appear to the panel oper-
ator. Names with 8 characters will also have its last character overwritten if
a Breakaway condition exists.
If names exceed 7 or 8 characters, they should be carefully selected so that
the first characters are always unique for a given item. Otherwise ambi-
guity, confusion and operator error are likely to result.
Always Define Short Name (ID)
Short names (ID) are used by default. If left blank Encore system operation
problems may occur.
Spaces in Names
While it is permissible to use a space character in some names, we advise
against their use for usability and compatibility reasons.
Note S alvo keypad and file names must not contain spaces.
Upper Case Characters
To ensure consistency, you may want to always use UPPER CASE charac-
ters for names. It is possible to use upper and lower case letters to indicate
separate words/abbreviations in a name LikeThis. However, some screens
may revert to display only upper case characters, so this practice may not
always be appropriate.
Panel and Template Names
All panel and template names must be unique, and no panel name should
be the same as a template name or vice-versa.
RCL Client Names
All RCL clients (up to 17 are allowed)
must
have unique names to prevent
unpredictable behavior.
RCL Client names must not begin with any form of “com.”