GRASS VALLEY Encore, Руководство по настройке

Страница: 340 / 426

340 Encore — Configuration Manual
Section 8 — Additional OUI Operations
Setting up Salvos
1. Click the
Salvos
button to display the Salvos window.
Figure 205. LRP Salvos Window
2.
Click
Load Salvo
to edit an existing Salvo;
Delete Salvo
to delete the
currently loaded Salvo; or
Clear Salvo
to clear any loaded Salvo and
create a new one.
3. Click the
Salvo Keycap
button and enter the new Salvo name on the
Keypad displayed. Press the return key when finished.
Note The S alvo keycap name must be identical to the S alvo filename saved in
S tep 7 below. The name entered in both locations must be must be 8 charac-
ters or less, not be a duplicate of an existing S alvo, cannot have spaces, and
cannot contain the following special characters:
/ \ ; : , * ? “ < > | ,
4. Click the
Dest
column and select the Destination required. You may
need to open the folder to see the entire list of Destinations available.
5. Click the
Source
column and select the Source required. Again, you may
need to open the folder to view all the Sources available or scroll back
to the top of the list window.
6.
Click in the
Levels
column of the Salvos window and select the Level
required from the window displayed.
7.
Click the
Save Salvo
button to save new Salvo.
Note The name of the saved S alvo file must match the keycap name entered in
S tep 3 above.