GRASS VALLEY Encore, Руководство по настройке

Страница: 120 / 426

120 Encore — Configuration Manual
Section 5 — Router Configuration
Insert before
Allows a newly defined controller to be inserted before
the one specified in the subsequent screen. Use the insert
and delete buttons with caution; results have global
implications.
Note: The order of controllers determines which subset of
outputs are controlled by a particular controller. For
example, if there are 128 outputs in a Crosspoint Group,
and there are four controllers, and there are 32 outputs per
controller, then
Controller 1 controls outputs 1-32
Controller 2 controls outputs 33-64
Controller 3 controls outputs 65-96
Controller 4 controls outputs 97-128.
Insert after
Allows a newly defined controller to be inserted after the
one specified in the subsequent screen. Use the insert and
delete buttons with caution; results have global implica-
tions.
Delete Controller
Removes the specified controller from this configuration.
Use the delete and insert buttons with caution; results
have global implications.
Segment ID
Displays the ID number for the chosen Segment. Choose
a specific Segment using the buttons to the right of the
field. See
Segment on page 124 for a definition and expla-
nation of Segments.
Segment type
Allows specifying the Segment as blocked or interleaved
— the latter with several options for the interleaving
increment.
First Input
Enter the number corresponding to the first input for the
displayed Segment here. This number must be within the
specified range, but does not have to be sequential.
Last Input
Enter the number corresponding to the last input for the
displayed Segment here. This number must be within the
specified range, but does not have to be sequential.
First Output
Enter the number corresponding to the first output for the
displayed Segment here. This number must be within the
specified range, but does not have to be sequential.
Last Output
Enter the number corresponding to the last output for the
displayed Segment here. This number must be within the
specified range, but does not have to be sequential.