GRASS VALLEY Encore, Руководство по настройке

Страница: 95 / 426

Encore — Configuration Manual 95
Multiple Area Encore Systems
4. Select
Save
.
Note The Router Control application is not assigned to an Area using the S ystem
Manager. This assignment is made within the Router Control application
itself, as described below under
A ss ig n i n g a Route r Co n t r olle r to a n A r ea on
page 95 .
Assigning an SCB to an Area
In multi-Area systems, the System Manager is used to assign all SCBs to the
default Area. If you are adding new SCBs, you will need to add these
“engines,” their IP addresses, and their applications.
1.
Go to
System Manager > Engines
.
2. Click
Select
and choose an engine from the list.
3.
Click
Area
and select an Area from the list.
4. Set the Availability flag:
• For unrestricted log-in access set the Off-line / Local / All Areas
flag to
All Areas
.
• For restricted access set the flag to
Local
.
5.
Select
Save
.
Assigning a Router Controller to an Area
Using the Router Control application, each router is assigned to one Area.
For example, “Router A” could be assigned to “StudioA.”
Note Do not assign more than one Router Control application (or redundant Router
Control pair, i.e., more than one router) to the same Area.
Note The Area of the Router Control application can only be changed from the
application. Changing the Area of the engine on which the Router Control
application is running or changing the Area of this application from the
S ystem Manager does not get reflected on the Router Control application
even if S ystem Manager, S harer, or the S CB (engine on which the Router
Control application is running) is rebooted.
Open the Router Control application (if not open already):
1. Launch the OUI and select
Start
.
2.
Enter your User ID (e.g. SYS).
3. Press
Enter
to close the “Welcome to Encore” window.
4.
Select the first Router Control application.