GRASS VALLEY Encore, Руководство по настройке

Страница: 181 / 426

Encore — Configuration Manual 181
Options Screen Description
Process matrix
offline
When ON, displays the Report NoMatrix button.
Report NoMatrix
When ON a No Matrix condition is reported as
NoMatrix
.
When OFF a no Matrix conditions is reported as
Undef
.
Chop Switch Rate
Sets the rate that Takes will alternate between two Chop-
ping Sources.
Unavailable
Levels
Controls Encore system behavior when mis-matched
level Takes are performed. One example is taking a video
only single level source (e.g. camera) to a video/audio
level destination (e.g. DDR).
None
- System behavior prior to v1.7.4 software. The Take
will be performed, but an error message will be displayed
for one half second that can obscure panel display source
status reporting.
Park Levels
- The Take is performed, and unavailable levels
will be parked.
No TLM Error - Same as None, except the error message is
suppressed.
To enable logging, click this button to choose the type of
logging. The logging option indicator buttons are toggles;
click an option indicator button to reverse its state. In
Windows NT you can log to a file and/or the console and
determine whether the log file(s), if any, is verbose and/
or driver mode. Selecting either of the top two logging
options — they’re not mutually exclusive — also lights
the Logging indicator button. Finally the Memory Used
field displays the amount of memory the Router Control
application is using.
CAUTION - Logging Router or Tie-Line Manager activity
impacts performance. Logging to the terminal/console
slows performance somewhat. Logging to a file affects
system performance considerably and can fill up a hard
disk quickly. Except during diagnostic procedures, we
recommend disabling logging.
Sync Router
Toggle button. When the indicator is green, the Router
Controller (on start-up) synchronizes itself to the physical
state of the router matrices that it is controlling by reading
back the Crosspoint status from all controlled matrices.