GRASS VALLEY Encore, Руководство по настройке

Страница: 257 / 426

Encore — Configuration Manual 257
Configuring Encore Control Panels
In large facilities or wide area networks (WAN), where devices are physi-
cally located great distances apart, this feature should be used carefully and
with coordination so as not to adversely affect other system users who are
sharing the same Exclusion/Page/Keypad set.
Changes to a set are sent to all device configurations sharing the set when
the user selects the
Save
button on the OUI screen for the type of set being
edited.
In the case of Level Exclusion sets, users should also be careful when
excluding Levels to ensure the desired Tally Level is not excluded. In the
case of control panel default tally Levels the OUI indicates the default tally
Level by turning the appropriate Level button indicator yellow. The hover
help also indicates which Level is the configured default tally Level. If
users desire, they may exclude the default tally Level and the OUI will
display a choice to cancel or accept the suggested system change of recon-
figuring the default tally Level to the first lowest (1-32) Level not excluded.
This will only change the default tally Level on the panel configuration
being edited; it will not change the default tally Level on the other panel
configurations sharing this Exclusion Set.
If a Level Exclusion Set is applied to a panel that has been preset to use a
newly excluded Level, that Level becomes unavailable and Breakaway
Takes will result. If a Level Exclusion set that no longer excludes that Level
is then reapplied to that panel, that Level will continue to be excluded, and
Breakaway Takes will still occur. Choosing another Destination or manu-
ally selecting Levels will return the panel to regular operation.
Note Level Exclusion S ets require a minimum of one Level to always be available
(not excluded). Attempts to exclude all system Levels will be rejected by the
OUI with a warning message. The Exclude All button by default excludes all
Levels (for faster configuration) except the panel’s default Tally Level. For
RCL Clients the OUI excludes all Levels by default except Level 1.
After saving the Exclusion Set change, users must also save the panel con-
figuration change of default tally Level (the OUI will prompt users and
provide an option to save the panel configuration if they forget to save
these changes to the panel configuration).
Salvo Button Configuration
When changing button type assignments from the OUI for
Salvo Select
but-
tons, you must be sure to select a valid Salvo for the button. Otherwise,
during configuration the button is assigned a NO_BUTTON type to avoid
the possibility of triggering an unwanted Salvo Take operation.