GRASS VALLEY Encore, Руководство по настройке

Страница: 108 / 426

108 Encore — Configuration Manual
Section 5 — Router Configuration
Creating a New Router Configuration
It is advisable to save any existing Router Configuration as a named file
before making configuration changes. This data pertains only to that spe-
cific Router Controller, and allows you to easily restore it to its previous
state without having to restore the entire OMN database.
If you are configuring a brand new Encore system and used the Dummy
Test Config to test the system, as described earlier, you do not need to save
that configuration file since it should already exist on your system.
1. Click the
Config
button on the Main menu of the Router Control
application.
2. Click
Save
and enter a descriptive file name for the existing router
configuration, then click
Save
again to save a copy of the database file
3. When the System Configure screen re-appears, click the
Delete Database
button to purge any existing configuration and click OK to approve the
deletion.
This deletes the database from the System Controller’s memory, not
from the Sharer. (This step can be reversed by clicking
Load and
selecting the database file you just saved.)
TLM Status
Opens a window that reports the status and IP addresses
of Tie-Line Managers at the time the window was opened.
The Master/Mirror TLM Status text button reports three
conditions:
Healthy
(green): A TLM is up and running.
Failed
(red): The RE did recognize the TLM service in the
past, however, right now, the TLM is not responding.
Not Detected
(red): The TLM is not running on the network,
or the TLM is in Disabled mode.
If the Router Controller detects failure of a TLM (either
Mirror or Master), an unsolicited message appears on the
Router Controller OUI to indicate the change in TLM
status.