GRASS VALLEY Encore, Руководство по настройке

Страница: 178 / 426

178 Encore — Configuration Manual
Section 5 — Router Configuration
Changing a Name
1.
Select either Sources or Destinations by clicking on the
Sources
or
Destinations
indicator button in the bottom left corner of the screen. The
screen will then display either the Source names or the Destination
names (depending on your choice).
2.
Use the arrow buttons if necessary to scroll through the index of names
until you find the name that you want to change.
3.
Click on the ID or long name that you want to change. Type the new
name in the alpha/numeric keypad that appears on the screen. The
new name is then shown in the index of names.
4. Repeat Step 2 and Step 3 until you have changed all the names that you
want.
5. Click on the
Save Changes
button to confirm and register all the name
changes.
Naming Conventions
Follow the naming conventions in this section to ensure the best Encore
functionality.
ID (short name)
column
Lists the short name for the Destination or Source. This is
the name displayed by default on the Control Panels and
in the Local Router Panel. Do not edit this field to be
blank.
Name (long
name) column
Lists the long name for the Destination or Source.
Up Down Arrows
Pages up or down one screen of Destinations or Sources
per click.
Sources indicator
When the indicator is green, the Names Screen shows the
Source names.
Destinations
indicator
When the indicator is green, the Names Screen shows the
Destination names.
Save
Saves any changes that have been made to either the
Source or Destination names.
Commit Changes
Broadcasts the configuration change throughout the
Encore network.