GRASS VALLEY Encore, Руководство по настройке

Страница: 136 / 426

136 Encore — Configuration Manual
Section 5 — Router Configuration
45. Click the
Alias
button to give the Source an Alias.
A Source Alias is an additional name that can be defined and/or
changed from another application such as the Local Router Panel
without the potential risks associated with using Router Control appli-
cation. Aliases enable operators to give more meaningful temporary
names to Sources and can then be displayed on Encore control panels
and the Local Router Panel instead of the underlying (actual) Source
name. For example: Let’s say you have a Source named SAT-1 (Satellite-
1). If the signal on SAT-1 happens to be HBO, then a meaningful name
might be HBO. If the signal changes to CNN, the alias can be changed
to CNN without re-configuring the router.
46. Click the
Type
button to choose a hardware type for the Source you’re
configuring.
Figure 79. Select Type window — Sources
47. In the
Matrix Allocation
section of the screen, click in the
Name
column to
the right of a Level that you want to be routed from your Source, and
select the router matrix that you want to perform the Take from the list
window that appears.
48. Click in the
Type
column to toggle between Physical and Virtual
definitions for the matrix listed on the same row in the Name column.
49. Click in the
I/O
column next to the same Level used in Step 47 . Enter the
number corresponding to the physical connector ID on the Source’s
router matrix.