manualshive.com logo in svg

Grandstream Networks GRP261 Series, Руководство администратора

Поделиться
Скачать
Grandstream Networks GRP261 Series Скачать руководство пользователя страница 76

Server

Configures BroadSoft IM&P server address. Usually it's not necessary to configure
and it can already be found in the BroadSoft IM&P username.

Port 

Configures port for the BroadSoft IM&P server. Default Port is 5222.

Username 

Configures BroadSoft IM&P username. This is not the BroadSoft account username.

Password 

Configures BroadSoft IM&P username. This is not the BroadSoft account username.

IM&P Settings

BroadSoft IM&P

Configures to enable BroadSoft Instant Message and Presence Feature.

Associated BroadSoft Account 

Configures the BroadSoft account to dial out with. IM&P contacts can be selected to
dial out with if they have an extension number entry.

Auto Login

Configures whether or not to log in BroadSoft IM&P account at bootup.

Display Non-XMPP Contacts

Configures whether or not to display non-XMPP contacts associated with the
BroadSoft IM&P user. Non-XMPP contacts will not display presence or status
message.

External Service 

🡪

 E911 Service

Enable E911

Enable Enhanced 911 call. Default is disabled

HELD Protocol

Configure HELD transfer protocol. HTTP or HTTPS

Configure HELD transfer protocol

The valid synchronization interval is between 30 to 1440 minutes. The
synchronization is off when the interval is 0.

Location Server

Configure the primary Location Information Server (LIS) address

Location Server Username

Configure the user name of the primary Location Information Server (LIS)

Location Server Password

Configure the password of the primary Location Information Server (LIS)

Secondary Location Server

Configure the seconary Location Information Server (LIS) address

Secondary Location Server
Username

Configure the user name of the secondary Location Information Server (LIS)

Secondary Location Server
Password 

Configure the password of the secondary Location Information Server (LIS)

HELD Location Types 

Configure "locationType" element in the location request. "geodetic", "civic" and
"location URI"

HELD Use LLDP Information

If "Yes", the information from LLDP-suport switch is used to generate ChassisID and
PortID; otherwaise, the mac address of gateway and phone is used as default.

HELD NAI

If "Yes", Network Access Identifier (NAI) is included as a device identity in the
location request sent to the Location Information Server (LIS)

E911 Emergency Numbers

A user can configure multiple emergency numbers separated with the delimiter
symbol ";".

Содержание GRP261 Series









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды