Table 14: Phone Settings Page Definitions
Network Page Definitions
The valid range is 0 to 7 and default setting is 5.
Call Tone Volume
Used to configure the call tones’ level in dB. Values range from -15 to 15.
Lock Speaker Volume
Lock volume adjustment when the option is enabled so it cannot be changed from
phone LCD. The option can be set to: “No”, “Ring”, “Talk” or “Both”.
Default setting is “No”.
Default Ringtone
Allows to set Default Ringtone as their Global ringtone.
Note: The ring tone set in individual accounts have higher priority to this setting. If
the user wants the default ring tone to be used globally, he needs to set the ring tone
of each account to Default Ring Tone; Otherwise, it will be whichever the ring tone
you set.
Important: The Priority goes as: Contact Ring Tone
🡪
Account Ring Tone
🡪
Default
Ring Tone.
Provision
Total Number of Custom Ringtone
Update
Configures the number of custom ringtones to update in the provisioning process.
The default setting is 3. The valid range is 0 - 10.
Settings
🡪
Multicast Paging
Multicast Paging Function
Enable or disable multicast paging. The default setting is "No".
Allowed in DND Mode
Allow Multicast Paging when DND mode is enabled.
Default Setting is “No”.
Paging Barge
During active call, if incoming multicast page is higher priority (1 being the highest)
than this value, the call will be held and multicast page will be played.
The default setting is “Disabled”.
Paging Priority Active
If enabled, during a multicast page if another multicast is received with higher
priority (1 being the highest) that one will be played instead.
The default setting is “Enabled”.
Multicast Channel Number
Multicast Channel Number (0-50). 0 for normal RTP packets, 1-50 for Polycom
multicast format packets.
Multicast Paging Codec
The codec for sending multicast pages, there are 5 codecs could be used: PCMU,
PCMA, G.726-32, G.729A/B, G.722 (wide band), G.723.1.
Default setting is “G.722(wide band)”.
Multicast Sender ID
Outgoing caller ID that displays to your page group recipients (for multicast channel
1 – 50).
Multicast Listening
Defines multicast listening addresses and labels. For example:
●
“Listening Address” should match the sender’s Value such
as: “237.11.10.11:6767”
●
“Label” could be the description you want to use.
For details, please check the “Multicast Paging User Guide” on our Website.
