manualshive.com logo in svg

Grandstream Networks GRP261 Series, Руководство администратора

Поделиться
Скачать
Grandstream Networks GRP261 Series Скачать руководство пользователя страница 32

SRTP Key Length

Allows users to specify the length of the SRTP calls. Available options are:

●

AES 128&256 bit

●

AES 128 bit

●

AES 256 bit

Default setting is: AES 128&256 bit 

Crypto Life Time

Enable or disable the crypto life time when using SRTP. If users set to disable
this option, phone does not add the crypto life time to SRTP header.
The default setting is “Yes”.

Enable RTCP

Enables user to select to use RTCP, RTCP-XR, or disable the feature.

VQ RTCP-XR Collector Name

Configures the host name of the central report collector that accepts voice
quality reports contained in SIP PUBLISH messages.

VQ RTCP-XR Collector Address

Configures the IP address of the central report collector that accepts voice
quality reports contained in SIP PUBLISH messages.

VQ RTCP-XR Collector Port

Configure the port of the central report collector that accepts voice quality
reports contained in SIP PUBLISH messages. Default is “5060”.

Symmetric RTP

Defines whether symmetric RTP is supported or not.
Default setting is “No”.

Account x 

🡪

 Call Settings

General

Key As Send

Defines the timeout (in seconds) for no key entry. If no key is pressed after the
timeout, the digits will be sent out. The default value is 4 seconds. 
The default setting is “Pound (#)”. 

No Key Entry Timeout

Configures the timeout (in seconds) for no key entry. If no key is pressed after
the timeout, the collected digits will be sent out. The default setting is 4.

Send Anonymous

If set to “Yes”, the “From” header in outgoing INVITE messages will be set to
anonymous, blocking the Caller ID to be displayed.
Default is “No”.

Anonymous Call Rejection

If set to “Yes”, anonymous calls will be rejected. 
The default setting is “No”.

Enable Call Waiting

Enables / disables the call waiting feature for the current account. When set to
“Default”, global call feature setting will be used. 
Default value is “Default”.

RFC2543 Hold

Allows users to toggle between RFC2543 hold and RFC3261 hold. RFC2543
hold (0.0.0.0) allows user to disable the hold music sent to the other side.
RFC3261 (a line) will play the hold music to the other side. 
The default setting is “No”.

Ring Timeout

Defines the timeout (in seconds) for the rings on no answer. The default
setting is 60. 
The valid range is from 10 to 300.

Call Log

Configures Call Log setting on the phone.

●

Log All Calls

Содержание GRP261 Series









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды