manualshive.com logo in svg

Grandstream Networks GRP261 Series, Руководство администратора

Поделиться
Скачать
Grandstream Networks GRP261 Series Скачать руководство пользователя страница 34

3.

During blind transfer, after transferor received 200/202 for REFER, but
there is no NOTIFY from server after 7 seconds, transferor will decide to
recover the call with transferee or not depending on the options. This is
the only case that this option will be applied.

Blind Transfer Wait Timeout

Defines the timeout (in seconds) for waiting SIP frag response in blind
transfer. Valid range is 30 to 300. 
Default setting is “30”. 

Refer-To Use Target Contact

If set to “Yes”, the “Refer-To” header uses the transferred target’s Contact
header information for attended transfer. 
The default setting is “No”. 

Hide Dialing Password

Allows users to hide the password when the dialing number matches the
configured prefix.

●

Prefix for Dialing Password

●

Password Length

Early Dial

Selects whether to enable early dial. If it’s set to “Yes”, the SIP proxy must
support 484 responses. Early Dial means that the phone sends for each
pressed digit a SIP INVITE message to SIP server. SIP server considers its
extensions and, if no match happened yet, it sends back a “484 Address
Incomplete” message. Otherwise, it executes the action.
The default setting is “No”.

Call Forward

Enable Forward All

If set to "Yes", all calls will be forwarded to the number specified below.

All To

Specifies the number to be forwarded to when enabled Forward all.

Enable Busy Forward

If set to "Yes", call will be forwarded to the number specified below on busy.

Busy To

Specifies the number to be forwarded to for Call Forward On Busy.

Enable No Answer Forward

Specifies the number to be forwarded to for Call Forward On Busy.

No Answer To

Specifies the number to be forwarded to for Call Forward On Busy.

No Answer Timeout (s)

Specifies the number to be forwarded to for Call Forward On Busy. 
The default value is 12 seconds. 
The valid range is 1 to 120. 

Dial Plan

Dial Plan Prefix

Configures a prefix added to all numbers when making outbound calls.

Bypass Dial Plan 

Enable/Disable the dial plan bypass while dialing through:

●

Contact

●

Call History Incoming Call

●

Call History Outgoing Call

●

Dialing Page

●

MPK

●

API

The default setting is “MPK”.

Содержание GRP261 Series









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды