Table 14: Maintenance Page Definitions
System Settings Page Definitions
Show Target Softkey
Configures whether to show Target softkey on LCD screen.
Enabled by Default
Idle Screen Settings
Use Long Label
If enabled, the VPK label will extend as desired.
Call Screen Settings
Transfer Mode via Programmable
Keys
Configures the transfer mode to use when pressing the "Transfer" MPK. Choose
from Blind Transfer, Attended Transfer, or New Call.
Set to Blind Transfer by Default.
Enable Transfer via Non-Transfer
Programmable Keys
Configures MPK with type BLF, Speed dial, etc.,to perform as transfer MPK under
active call.
Disabled by Default.
Show Keys Label
When labels are hidden, the keys will have reduced size and show icons only.
Toggle: This option will add a softkey used to show or hide labels.
Set to Show by Default.
EXT Settings
One Page Display Mode
If enabled, each extension board only shows 20 extensions and EXT 1 to EXT 80
could be displayed on 4 connected boards.
Disabled by Default
Sync Backlight with LCD
If enabled", the extension board backlight will turn off when the LCD becomes idle.
Disabled by Default.
Settings
→
Time and Language
Date and Time
NTP
Server
Defines the URL or IP address of the NTP server. The phone may obtain the date and time from the server. The
default setting is “pool.ntp.org”.
Second
ary NTP
Server
Defines the URL or IP address of the NTP server. The phone may obtain the date and time from the server. Allow
user to configure 2 NTP server domain names. GRP will loop through all the IP addresses resolved from them.
NTP
Update
Interval
Time interval for updating time from the NTP server. Valid time value is in between 5 to 1440 minutes.
The default setting is “1440” minutes.
Allow
DHCP
Option
42
Overrid
e NTP
Server
Defines whether DHCP Option 42 should override NTP server or not. When enabled, DHCP Option 42 will override
the NTP server if it is set up on the LAN. The default setting is “No”.
