Using the Phone Stand
For installing the phone on the table with the phone stand, attach the phone stand to the bottom of the phone where there is
a slot for the phone stand. (Upper half, bottom part).
Using the Slots for Wall Mounting
1. Attach the wall mount spacers to the slot for wall mount spacers on the back of the phone.
2. Attach the phone to the wall via the wall mount hole.
3. Pull out the tab from the handset cradle (See figure below).
4. Rotate the tab and plug it back into the slot with the extension up to hold the handset while the phone is mounted on the
wall (see figure below).
Figure 3: Tab on the Handset Cradle
Connecting the GRP261X/GRP2624/GRP2634/GRP2670/GRP2650
To set up the GRP261X/GRP2624/GRP2634/GRP2670/GRP2650, follow the steps below:
1. Connect the handset and main phone case with the phone cord.
2. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the router) using the
Ethernet cable.
3. Connect the PSU output plug to the power jack on the phone; plug the power adapter into an electrical outlet. If a PoE
switch is used in step 2, this step could be skipped.
4. The LCD will display provisioning or firmware upgrade information. Before con tinuing, please wait for the date/time display
to show up.
5. Using the phone embedded web server or keypad configuration menu, you can further configure the phone using either a
static IP or DHCP.
