Config Server
Password
The password for the HTTP/HTTPS server.
Always Authenticate
Before Challenge
Only applies to HTTP/HTTPS. If enabled, the phone will send credentials before being challenged by
the server.
Config File Prefix
Enables your ITSP to lock configuration updates. If configured, only the configuration file with the
matching encrypted prefix will be downloaded and flashed into the phone.
Config File Postfix
Enables your ITSP to lock configuration updates. If configured, only the configuration file with the
matching encrypted postfix will be downloaded and flashed into the phone.
Authenticate Conf
File
Authenticates configuration file before acceptance.
XML Config File
Password
The password for encrypting XML configuration file using OpenSSL. This is required for the phone to
decrypt the encrypted XML configuration file.
Provision
Auto Upgrade
Automatic Upgrade
Enables automatic upgrade and provisioning.
The default setting is “No”.
Automatic Upgrade
Check Interval (m)
Specifies the time period to check for firmware upgrade (in minutes). The default value is 10080
Hour of the Day(0-
23)
Defines the hour of the day to check the HTTP/TFTP/FTP server for firmware
Upgrade or configuration files changes. The default value is 1.
Day of the Week(0-6)
Defines the day of the week to check HTTP/TFTP/FTP server for firmware.
Upgrade or configuration files changes. The default value is 1.
Randomized
Automatic Upgrade
Randomized Automatic Upgrade within the range of hours of the day or postpone the upgrade every
X minute(s) by random 1 to X minute(s).
The default setting is “No”
Firmware Upgrade
and Provisioning
Specifies how firmware upgrading and provisioning request to be sent: Always
Check for New Firmware, Check New Firmware only when F/W pre/suffix
Changes, Always Skip the Firmware Check.
The default setting is “Always Check for New Firmware”.
Firmware Upgrade
Confirmation
If set to “Yes”, the phone will ask the user to upgrade. If there is no response, the phone will proceed
with the upgrade.
If set to “No”, the phone will automatically upgrade without user input.
Default is Yes.
DHCP Option
Allow DHCP Option
43 and Option 66
Override Server
DHCP option 66 originally was only designed for TFTP server. Later, it was extended to support an
HTTP URL. GRP phones support both TFTP and HTTP server via option 66. Users can also use
DHCP option 43 vendor specific option to do this. DHCP option 43 approach has priorities. The
phone is allowed to fall back to the original server path configured in case the server from option 66
fails. The default setting is “Yes”.
Allow DHCP Option
120 to override SIP
Enables DHCP Option 120 from local server to override the SIP Server on the phone. The default
setting is “No”.
