manualshive.com logo in svg

Grandstream Networks GRP261 Series, Руководство администратора

Поделиться
Скачать
Grandstream Networks GRP261 Series Скачать руководство пользователя страница 50

PC Port Priority Value

Assigns the priority value of the PC port. The valid range is 0 – 7. 
The default value is 0.

Enable CDP

Enables/Disables CDP “Cisco Discovery Protocol”. 
The default setting is “Enabled”.

Enable LLDP

Controls the LLDP (Link Layer Discovery Protocol) service. 
The default setting is “Enabled”.

LLDP TX Interval

Defines LLDP TX Interval (in seconds). Valid range is 1 to 3600. 
The default setting is “60”.

Maximum Transmission Unit (MTU)

Defines the MTU in bytes. The valid range is 576 – 1500. 
The default value is 1500 bytes.

Network 

🡪

 Remote Control

Action URI Support

Enables/disables action URI feature on the phone. 
The default setting is “Enabled”. 

Remote control Pop up window
support

Indicates whether the phone is enabled to pop up allow remote control. 
The default setting is “Enabled”. 

Action URI allowed IP list

List of allowed IP address from which the phone receives action URI. The Allowed IP
addresses are separated by a comma such as “192.168.1.1,192.168.1.2”. Set this
field to “any” to allow any IP address to send Action URL to the phone. The default
value is empty string which means no IP address is allowed for remotely control the
phone.

CSTA Control

Indicates whether CSTA Control feature is enabled. Change of this configuration will
need the system to reboot to take effect. The default setting is “Disabled”.

Network 

🡪

 Affinity Settings (GRP2614, GRP2615, GRP2616, GRP2624, GRP2634, GRP2670 & GRP2670 only)

Affinity Support

Allows communication with GS Affinity CTI application to manage telephone calls
from computer. If enabled, a reboot is required to establish the communication.
Default is “Disabled”. 

GS Affinity CTI Application is available 

HERE

 and its User Guide 

HERE

.

Preferred Account

Selects the account on which CTI support is enabled.

Network 

🡪

 Bluetooth Settings (GRP2614, GRP2615, GRP2616, GRP2624, GRP2634, GRP2670 & GRP2670 only)

Bluetooth Power

Configures Bluetooth to power “On”, “Off” or “Off & Hide Menu From LCD”.
If set “Off & Hide Menu From LCD”, Bluetooth will be disabled, and users will not find
Bluetooth settings on phone LCD Menu, while if set to “No”, Bluetooth will be
disabled, and Bluetooth Settings menu will be available, and user can enable it. The
default setting is “On”.

Handsfree Mode

Enable / disable Bluetooth handsfree feature. Default setting is “Off”.

Bluetooth Name

Specifies the Bluetooth device name.

Network 

🡪

 OpenVPN® Settings

OpenVPN® Enable

Enables/Disables OpenVPN® feature. Default is “No”.

Содержание GRP261 Series









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды