manualshive.com logo in svg

Grandstream Networks GRP261 Series, Руководство администратора

Поделиться
Скачать
Grandstream Networks GRP261 Series Скачать руководство пользователя страница 49

Network 

🡪

 Advanced Settings

802.1X mode

Allows the user to enable/disable 802.1X mode on the phone. The default value is
disabled. To enable 802.1X mode, this field should be set to EAP-MD5, users may
also choose EAP-TLS, or EAP-PEAPv0/MSCHAPv2.

802.1X Identity

Enter the Identity information for the 802.1x mode.
Note: Letters, digits and special characters including @ and – are accepted.

MD5 Password

Enter the MD5 Password for the 802.1X mode.
Note: Letters, digits and special characters including @ and – are accepted.

802.1X CA Certificate

Uploads / deletes the 802.1X CA certificate to the phone; or delete existed 802.1X
CA certificate from the phone.

HTTP Proxy

Specifies the HTTP proxy URL for the phone to send packets to. The proxy server
will act as an intermediary to route the packets to the destination.

HTTPS Proxy

Specifies the HTTPS proxy URL for the phone to send packets to. The proxy server
will act as an intermediary to route the packets to the destination.

Bypass Proxy for

Configures the destination IP address where no proxy server is needed. The phone
will not use a proxy server when sending packets to the specified destination IP
address.

Layer 3 QoS for SIP

Defines the Layer 3 QoS parameter for SIP. This value is used for IP Precedence,
Diff-Serv or MPLS. 
The default value is 26.

Layer 3 QoS for RTP

Defines the Layer 3 QoS parameter for RTP. This value is used for IP Precedence,
Diff-Serv or MPLS. 
The default value is 46.

Release DHCP On Reboot

Configures whether the phone will release the DHCP lease on reboot.
Enabled by Default.

Enable DHCP VLAN

Enables auto configure for VLAN settings through DHCP. 
Disabled by default.

Enable Manual VLAN Configuration

Enables/disables manual VLAN configuration. When this option is set to Disabled,
the phone will bypass VLAN configuration and only use the DHCP VLAN to configure
VLAN tag and priority. 
Default is “Enabled”.

Layer 2 QoS 802.1Q/VLAN Tag

Assigns the VLAN Tag of the Layer 2 QoS packets. The valid range is 0 – 4094.  
The default value is 0.

Layer 2 QoS 802.1p Priority Value

Assigns the priority value of the Layer2 QoS packets. The valid range is 0 – 7. 
The default value is 0.

PC Port Mode

Configure the PC port mode. When set to “Mirrored”, the traffic in the LAN port will
go through PC port as well and packets can be captured by connecting a PC to the
PC port. 
The default setting is “Enabled”.

PC Port VLAN Tag

Assigns the VLAN Tag of the PC port. The valid range is 0 – 4094. 
The default value is 0.

Содержание GRP261 Series









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды