Table 12: Status Page Definitions
Account Page Definitions
●
Forward All
●
Busy Forward
●
Delay Forward
Status
🡪
Energy Saving
Current Hours
Displays wether it is Office Hours or Non-Office Hours configuration.
Energy Saving Mode
Displays the Energy Saving mode.
Idle Time Tracking
Displays Energy Saving Feedback for achieved energy savings. By showing the duration that the
phone has been powered up.
Status
🡪
Energy Saving
🡪
Applied Energy Saving Config
Backlight Brightness:
Active
Configures the LCD brightness when the phone is active. Valid range is 10 to 100 where 100 is the
brightest.
Active Backlight
Timeout
Configures active backlight timeout (in minutes). The valid range is 0 to 90.
Blank Screen Timeout
Displays The actual applied power saving timeout value under Standard, Maximum, or
Customized Mode
Enable Missed Call
Backlight
If set to "Yes", LCD backlight will be turned on when there is a missed call on the phone.
Enable IEEE 802.3az
EEE (Energy Efficient
Ethernet)
Configures whether to enable IEEE 802.3az Energy Efficient Ethernet.
Enable Live Keypad
If enabled, phone will automatically dial out and turn on hands-free mode when keypad or softkey
is pressed.
Account x
🡪
General Settings
Account Register
Account Active
Indicates whether the account is active.
The default setting is “No”.
Account Name
The name associated with each account to be displayed on the LCD. (e.g.,
MyCompany)
SIP Server
The URL or IP address, and port of the SIP server. This is provided by your
VoIP service provider (e.g., sip.mycompany.com, or IP address)
Secondary SIP Server
The URL or IP address, and port of the SIP server. This will be used when the
primary SIP server fails
Tertiary SIP Server
The URL or IP address, and port of the SIP server. This will be used when the
