Light
Flash
BLF
LED
Pattern
Explana
tion
Form
Contains a detailed explanation of the different LED Patterns available. and their light-flashing reaction.
Audio Control
Headset
Headse
t Key
Mode
When the headset is connected to the phone, users could use the HEADSET button in “Default Mode” or “Toggle
Headset/Speaker”.
Default Mode:
●
When the phone is in idle, press HEADSET button to off hook the phone and make calls by using headset.
Headset icon will display on the screen in dialing/talking status.
●
When there is an incoming call, press HEADSET button to pick up the call-using headset.
●
When there is an active call using headset, press HEADSET button to hang up the call.
●
When Speaker/Handset is being used in dialing/talking status, press HEADSET button to switch to headset.
Press it again to hang up the call. Or, press speaker/Handset to switch back to the previous mode.
Toggle Headset/Speaker:
●
When the phone is in idle, press HEADSET button to switch to Headset mode. The headset icon will display on
the left side of the screen
●
In this mode, if pressing Speaker button or Line key to off hook the phone, headset will be used.
●
When there is an active call, press HEADSET button to toggle between Headset and Speaker.
Headse
t Type
Selects a normal RJ9 headset, Plantronics EHS headset, Jabra EHS, or Sennheiser EHS for the headset type.
Always
Ring
Speake
r
Configured to enable/disable the speaker to ring when the headset is used on "Toggle Headset/Speaker" mode.
Group
Listen
with
Speake
r
In a call, the phone will display a soft key to enable speaker listening when the audio mode handset or headset.
EHS
Headse
t
Rington
e
Select EHS headset ringtone.
Headse
t TX
Gain
(dB)
Configures the transmission gain of the headset.
The default value is 0dB.
Headse
t RX
Gain
(dB)
Configures the receiving gain of the headset.
The default value is 0dB.
