System Settings
🡪
Security Settings
Web/SSH Access
SSH Access
Enable
SSH
Access
If enabled, the phone will allow any SSH access to the phone.
Enabled by Default.
SSH
Port
Configures the port for SSH access. The default is 22.
SSH
Public
Key
If Uploaded, the phone will use public key authentication as an alternative option to password authentication.
Keypad Mode
Configu
ration
via
Keypad
Menu
Configures access control for keypad Menu settings.
●
Unrestricted: all options on the LCD menu can be accessed;
●
Basic settings only: only options for basic settings can be displayed on the LCD menu;
●
Constraint mode: accessing options other than basic settings will require permission;
Locked mode: Menu is disabled.
Web Access
HTTP
Web
Port
Configures the HTTP port under the HTTP web access mode. The valid range is 80 – 65535. The default value is
“80”.
HTTPS
Web
Port
Configures the HTTPS port under the HTTPS web access mode. The valid range is 443 – 65535. The default
setting is “443”.
Web
Access
Mode
Sets the protocol for web interface.
●
HTTPS
●
HTTP
●
Disabled
●
Both HTTP and HTTPS
The default setting is “HTTP”.
Web
Access
Control
Web access control by using Whitelist or Blacklist on incoming IP addresses.
Web
Access
Control
List
Only allow the IP address list as a whitelist or restrict the IP address list as a blacklist to access the Web.
Web
Session
Timeou
t
Configures timer to logout web session during idle. The valid range is 2-60 min. The default value is 10 min
Enable
Administrator can disable or enable user web access.
