STUN Server
The IP address or Domain name of the STUN server. STUN resolution results are
displayed in the STATUS page of the Web GUI.
Only non-symmetric NAT routers work with STUN.
Use NAT IP
The NAT IP address used in SIP/SDP messages. This field is blank at the default
settings. It should ONLY be used if it’s required by your ITSP.
Delay Registration
Configures specific time that the account will be registered after booting up.
Enable Outbound Notification
Indicates whether Outbound Notification feature is enabled. Default is “Enabled”. For
more details refer to [OUTBOUND NOTIFICATION SUPPORT].
Public Mode
Enable Public Mode
Configures to turn on/off the public mode for hot desking feature.
The default setting is “Disabled”.
Public Mode Username Prefix
Used as prefix of public mode login, when public mode is enabled
Public Mode Username Suffix
Used as suffix of user name in public mode login, when public mode is enabled.
Allow Multiple Accounts
If set to "No", then after the user logs in to the public mode account on LCD, only the
public mode account can be used on the phone even though there are other
configured SIP accounts. If set to "Yes", then after the user logs in to the public
mode account on LCD, other configured SIP accounts on the phone can also be
used. Note: This option requires enabling public mode to take effect.
Enable Remote Synchronization
Enables phone to automatically download current account’s setting from remote
server and upload to the server.
Default setting is “Disabled”.
Server Type
Allows users to choose the type of the server (TFTP, FTP or HTTP) that stores
personal files of public account.
Default is “TFTP”
Server Path
Defines server path that stores personal files of public account.
FTP/HTTP User Name
Specifies User Name to access FTP/HTTP server.
FTP/HTTP Password
Specifies Password to access FTP/HTTP server.
Login Timeout
Configures Login timeout in Minute in public mode.
The default value is 10.
Settings
🡪
Settings
General
Key Mode
If set to “Line Mode”, the amount of VPKs will be the amount of lines you can have.
If set to “Account Mode”, the lines will be grouped by account, so the VPKs could
hold more lines in one account.
For example, with line mode, when the line is in use, by pressing the VPK, nothing is
going to happen. In Account Mode, when the line is in use, by pressing the VPK, a
new line will be initiated.
The default setting is “Account Mode”.
Preferred Default Account
Selects the preferred default account when offhook/onhook dialing. When selected
