manualshive.com logo in svg

Global Contract Bridges II, Руководство по установке

Поделиться
Скачать
Global Contract Bridges II Скачать руководство пользователя страница 54

Page

•

  

globalcontract.com

53

• Summer 2017

GLOBAL

Contract

INSTALLATION GUIDELINES

Connecting Display Wall to Bridges Tables

Display wall is typically supported by a Back 2 Back bridges table. See previous 
pages for detailed table installation instructions.

STEP 1: Use short 1/4-20 machine screws to secure four brackets to threaded 
inserts.

STEP 2: This step requires two people to slowly move the Display wall toward 
the table so that the brackets will slide into the gap between work surfaces and 
the leg beams.

STEP 3: Press the Display wall board horizontally against the work surface, 
align Display wall edges with edges of both work surfaces and drive supplied 
wood screws through pre-installed brackets into the work surface to secure it.

STEP 4: Remove the leg cable manages and slide bottom brackets up the leg 
extrusion. Secure both brackets with supplied screws as illustrated.

STEP 5: Position Mid bracket over the table beam, align its bottom hole with 
threaded insert in the Display wall and secure the Mid bracket with supplied 
machine screw.

STEP 6: Ensure that the Display wall is vertical and secure top of Mid brackets 
to the work surfaces with supplied wood screws.

STEP 7: Measure distance between the Bottom bracket and the bottom of the leg, 
trim Vertical cable managers accordingly and snap both back into table legs.

STEP 8: Follow Instructions included with the Display wall monitor bracket to 
install the bracket onto the Display wall. Use provided #10 machine screws to 
secure the Display bracket to threaded inserts.

STEP 9: Use 0.250” thick spacers (provided in the medial wall monitor bracket 
box) between the bracket and the display.

Note: Although there are two versions of Display walls, the method connect-
ing both to the bridges tables is an identical one. The Display walls differ in the 
direction in which they support TV / Display. One supports TV / Display facing 
the work surfaces and the other mounts the TV / Display facing outside of the 
table assembly. Note the location of threaded inserts (used to secure TV / Display 
bracket) on the Display wall surface.

1

4

7

6

5

2

1

3

8

9

NOT UL LISTED

Содержание Bridges II

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды