•Page
globalcontract.com
28
• Summer 2017
GLOBAL
Contract
INSTALLATION GUIDELINES
Secure Bracket to the glass
STEP 1: Slide Rubber washer onto threaded studs.
STEP 2: Slide Spacers onto the threaded studs with fl ange fi rst.
STEP 3: Position Bracket onto the glass and secure with two anodized caps.
STEP 4: Insert a pin into the hole in the cap and tighten.
STEP 5a: Have two installers hold the divider. Align the edges of both brackets with the
back edge of the worksurface and center the brackets equidistantly
between the table legs.
STEP 5b: Have two installers hold the glass modesty panel. Align the edge of the
modesty panel with the inner edge of the leg. Center the modesty panel equidistantly
between the table legs and secure with supplied 12 screws.
STEP 6: Secure with supplied 12 screws.
NOTE: 78” and 84” dividers and glass modesty panels require 3 brackets.
Table Mounted Divider with Integrated Modesty Panel, Glass
5a
5b
6
6
3
2
1
4
NOT UL LISTED
