G3 – Owner‘s Manual | 77
11.2.2.3
R
EVERB
T
YPES
MENU
[F3]
[INST REV. o. ROOM REV.]
[F1]
Reverb
You have the possibility to choose from different reverb
types. Use the dial
[7],
the navigation keys
[8]
or the
[+]
and
[-]
keys.
Plate1 Small Plates
Mechanically generated reverb without early reflections.
This is a simulation of a smaller reverb plate with a specific
characteristic.
Plate1 Med Plates
Mechanically generated reverb without early reflections.
This is a simulation of a medium reverb plate with a specific
characteristic.
Plate1 Large Plates
Mechanically generated reverb without early reflections.
This is a simulation of a large reverb plate with a specific
characteristic.
Plate2 Small Plates
Mechanically generated reverb without early reflections. This is a simulation of a smaller reverb plate with a
different characteristic than Plate 1 Small.
Plate2 Med Plates
Mechanically generated reverb without early reflections. This is a simulation of a medium reverb plate with a
different characteristic than Plate 1 Med.
Plate2 Large Plates
Mechanically generated reverb without early reflections. This is a simulation of a large reverb plate with a different
characteristic than Plate 1 Large.
Room Small
An algorithm that simulates a small room where early reflections are accepted.
Room Med
This is an algorithm that simulates a medium sized room where early reflections are accepted.
Room Large
An algorithm that simulates a large room in which early reflections are accepted.
Hall Small
An algorithm that simulates a smaller concert hall where early reflections and a longer decay than room simulations
occur.
Hall Med
An algorithm that simulates a medium-sized concert hall with early reflections and a longer decay than room
Содержание G3
Страница 14: ......
Страница 16: ...16 G3 Owner s Manual 3 MOUNTING INSTRUCTIONS 3 1 MOUNTING THE MODULE BRACKET ...
Страница 17: ...G3 Owner s Manual 17 3 1 CONNECTING EXTERNAL EQUIPMENT TO THE G3 MODULE 3 1 1 FRONT ...
Страница 18: ...18 G3 Owner s Manual 3 1 1 REAR PANEL Make sure that the unit is switched off before connecting the equipment ...