Gerber OMEGA CP, Справочное руководство

Страница: 717 / 826

703
3
Click Reset.
Configuring targets for accurate print-to-cut
registration
Configuring one or more targets ensures precise print-to-cut registration. Change the location of
the target in the Target Configuration dialog box. Choosing the target configuration is a
subjective choice related to the specific job and the preference of the operator:
♦
When processing a print and cut job with devices that use punched vinyl, one target is
usually sufficient for maintaining print-to-cut registration.
♦
When processing a print and cut job that does not use sprockets to feed the vinyl,
multiple targets are necessary. Using multiple targets compensates for misaligned
vinyl and minimizes errors that can occur due to vinyl shrinkage or expansion.
♦
For difficult or large jobs, use four targets to ensure optimum print-to-cut registration.
♦
Ensure that targets are dark enough to be recognized during alignment. There are two
options:
♦
Print targets using darkest foil in the job
♦
Print targets using black foil (added to the job if needed)
To configure targets
1
Click Setup > Print Options to open the Print Options dialog box.
2
Click Targets to open the Target Configuration dialog box.