Gerber OMEGA CP, Справочное руководство

Страница: 618 / 826

604 Chapter 53:
Opening and Closing GSPPlot
2
Click the vinyl color to output from the list. Choose multiple vinyl colors using
Ctrl+click.
3
When sending multiple vinyls, turn on Output by Separations and Pause between
Separations to allow you to change the vinyl between operations.
4
Click OK, gspplot - QuickPlot opens with the objects of one vinyl color
displayed on the work surface. Use the Previous Vinyl Color and Next
Vinyl Color commands to switch colors.
Sending a layered job from Composer to GSPPlot
When jobs created in Composer with layers are sent to GSPPlot via the Output All command
they are merged into a single layer. This causes the job to have one overall print order. You can
print and cut the job as you did in previous versions of OMEGA that did not support layers.
If you want to maintain layers for ease of printing and cutting, send the job to GSPPlot using the
Output by Layers command, or turn on Output by Layers in GSPPlot. If you have output more
than one layer you can display the individual layers using the Prior Vinyl and Next Vinyl
buttons. Each layer is treated as a separate job. The layer name displays at the top of the job
window as indicated in the following illustration.
When a layered job is sent to GSPPlot, Reduce Frame is automatically turned OFF to ensure that
objects are output in the correct location as compared to other objects in the job.
Tip: When printing by layer which causes foils to print on top of other foils, take into
consideration Overlap and Overprint settings that may be required.
Reduce Frame OFF
Output by Layer
Job and layer name
Next vinyl (displays
next layer)
Prior vinyl (displays
prior layer)