Gerber OMEGA CP, Справочное руководство

Страница: 122 / 826

108 Chapter 8:
All About Text
To set the length of the line in TOWS
1
Click the Text on the Work Surface tool to open the TOWS toolbar.
2
Enter text on the work surface.
3
Put the cursor anywhere in the line of text.
4
Enter a value in the Line Length dialog box.
5
Click on the work surface to activate the new length.
Tip: Turn off the Fixed Length box to return the length to the original length.
To set the length of the line in the Enter/Edit Text dialog box
1
In the Enter/Edit Text dialog box, enter text.
2
Choose one of the line justifications in F9 Layout.
3
Enter new value in F7 Forced Length text box to change the length.
4
The Forced Length % is automatically calculated and displayed in the text.
5
Entering a new % value in Forced Length can also change the length.
6
Remove the check in the check box if you want to return to the original length
(unforced, or free).
Tip: Reducing the length to less than 70% will probably cause unacceptable distortion.
Setting the height of the column
The Forced Height and Forced Height % commands allow you to change the height of a column
without changing the width of the characters.
To set the height of the column
1
In the Enter/Edit Text dialog box, enter text.
2
Choose one of the column justifications in F9 Layout.
3
Enter a new value in F7 Forced Height text box to change the height.
4
The Forced Height % is automatically calculated and displayed in the text.
5
Entering a new % value in Forced Height can also change the height.
6
Remove the check in the check box if you want to return to the original height
(unforced, or free).
Tip: Reducing the height to less than 70% will probably cause unacceptable distortion