Gerber OMEGA CP, Справочное руководство

Страница: 698 / 826

684 Chapter 62:
Cutting, Plotting, and Pouncing a Job
2
Choose the folder you want to Look in.
3
Choose the file to open from the list.
4
Click Open. The job is automatically sent to the plotter.
Double-cutting a job
You can set a plotter to double-cut a job through the Printer/Plotter Select dialog box. GSPPlot
Double-cutting is a helpful feature when plotting jobs on a thick material such as
PlastiGraphix
™
LexEdge
™
II that may require two passes.
To double-cut a job
1
In GSPPlot click Setup > Device Select to open the Plotter/Printer Select dialog box.
2
Choose the plotter from the list if there is more than one.
3
Turn on Double Cut.
4
Click OK to return to GSPPlot.
Sending the job to a plotter
When cutting a job out of vinyl or pouncing a job on paper, GSPPlot sends all the cut and
print/cut shapes to the plotter. When pen plotting the job, all the shapes including cut, print,
and cut/print shapes are sent to the plotter to be drawn.
When GSPPlot sends the job to a plotter it creates a Parameter (PRM) file. A PRM file contains
the variables established when you set up the file for printing and cutting.
CAUTION: Before sending the job to the plotter, load the appropriate media and
install the proper tool. Load vinyl and the knife tool for cut jobs, and paper and the
pounce tool for pounced jobs. Never pen plot a job with the knife installed because
it will damage the material.