Gerber OMEGA CP, Справочное руководство

Страница: 651 / 826

637
Chapter 58:
Advanced Setup Options
After a job is designed and output from Composer, you may want to alter it before plotting or
printing. GSPPlot provides the tools to change the size of a job, select or substitute the vinyls
and foils, and to change the weed border. Using these advanced setup options allows you to
modify a job without returning to Composer to recreate it.
Changing the size of a job
You can change the size of a job in GSPPlot in a number of ways: proportionally, through
expansion or compression of the length, or by changing the scale. When processing a large job,
resize a job to print a smaller version as a proof.
Changing the size of a job proportionally
In Layout, change the size of a job without changing its proportions by adjusting its height or
length.
When changing the size of a job by adjusting the height, the Free Length and Scale text boxes
automatically display the proportional change in measurements. When altering the Free Length
of a job, the Height and Scale values are automatically updated.
To size a job proportionally by altering its height
1
Click Layout > Layout to open the Layout dialog box.
2
In the Size group box enter a value in the Height text box.
3
Click Continue.