Gerber OMEGA CP, Справочное руководство

Страница: 46 / 826

32 Chapter 5:
Setting Up Composer's Work Surface
Displaying information
In Composer, you have the choice to display or hide the status bar, the rulers, and warnings.
In most cases, you will want to see the status bar information which includes:
♦
X and Y coordinates of the pointer
♦
The tool being used
♦
Icons for constraints that are turned on (On Axis, Grid, and Snap to Guidelines shown
left to right in the illustration)
♦
Measurements related to the tool being used
♦
Current style
Set the display of this information in Tools > Options.
To display the status bar and/or rulers
1
Click Tools > Options > View.
2
Turn on the Status Bar and/or Rulers check boxes.
To display warning message boxes
1
Click Tools > Options > General.
2
Turn on the Display Warning Message Boxes check box.
Opening, displaying, and moving toolbars
Toolbars are flyouts, dockable, and moveable. To set the preference of toolbars you want to
display when Composer opens, click Tools > Options > View and turn on the toolbars.
To open and display toolbars
1
Click View > Toolbars to open the Toolbars dialog box.
2
Turn on the toolbars to display.
3
Click OK.
Tip: If the Toolbox toolbar is open, click and hold on the icon or
click the triangle in the lower right corner of the icon to open the flyout toolbar.
Tip: You can also open the Toolbars dialog box by right-clicking in an empty area of a toolbar
and selecting View Toolbars.
To move a toolbar
Click the toolbar and drag it to a new location.
Note: Toolbars do not resize when they are moved. If a toolbar is dragged to a location that
does not have room for it, the end of the toolbar may be off the screen.