
GEFRAN
——————
Interface Board DeviceNet
——————
68
7.8 EDIT
The Editing phase is activated by pressing the Enter key when positioned on an
item that can be set; during this phase, the functions of the keys are as follows:
1) The Right/Left arrow keys are used to move along the number being specified;
the number of permitted digits depends on the type of data item being operated
on.
2) The “+” and “-” keys are used to increment/decrement the value of the selected
digit; permitted values are in the range 0 to 9.
3) Enter key confirms the setting.
4) Cancel key cancels the setting operation.
During Editing, the digit being set will flash.
Par. index Offset
0
Enter Offset
0 0 0 0
ok
Return without changes
0 ... 9
9 ... 0
SBI DeviceNet
OFFSET
+
-
E
CANC
E
E
CANC
The above figure shows an example of editing a value and the effect of keys during
this phase.