gefran SBI-DN, Инструкция по эксплуатации, Страница: 64 / 70

GEFRAN
——————
Interface Board DeviceNet
——————
64
Messaging type of Connection in order to send a cnxn-based
request
9 Cannot send cnxn-based request since a request is outstanding
10 Invalid instance identifier specified in received explicit messa-
ge request
11 Explicit message request is directed at non-existent cnxn instan-
ce
12 A Create request can only be sent to the class, not a particular
instance
13 ConfigCnxnndex already set
14 Unable to create cnxn class
15 Apply_attribute cannot be sent to the cnxn class, only a speci-
fic instance
16 Invalid service code received in explicit message request
17 Class specified in received Cnxn Based Explicit request mes-
sage does not exist
18 More than 2 group 2 object have been created
19 Maximum number of allocatable group 3 identifiers already
allocated
20 Group specified in open messaging connection is invalid
21 Invalid service code received in received ucmm request messag
22 Duplicate MacId check response has been received
23 Duplicate MacId check request has been received
24 Cannot send open cnxn-based request since a request is out-
standing
25 A connection within the client is not available
26 Timer Id not correct
27 expected_packet_rate not supported (is greater than maximum
allowed)
28 No more Timer available
29 watchdog_timeout_action not correct
30 Watchdog time-out occured
31 UCMM time-out occured
32 Explicit time-out occured
33 Attempt to deallocate a CAN channel not allocated
34 No more CAN channel available
35 No more CAN channel available for transmission
36 CAN Interrupt register error
37 CAN is still in hardware reset
38 CAN status register error
39 Error on allocation
40 BusOff detected
41 Error on the-allocation
42 Too much data
43 Parameter object data type not correct
44 Connection path not correct
45 I/O length not correct