
SBI-DN
53
——————
Interface Board DeviceNet
——————
Destination option not exist
The destination option does not exist on the
knot.
Parameter Access Conflict
The access to the addressed parameter is
denied (for example if we have a writing
command and the parameter is connected
to an external input).
Value out of the max range
The value is out of the maximum range.
Value out of the min range
The value is out of the minimum range.
Value not supported
The value is included in the range but it is not
allowed.
Parameter Configuration Conflict
The access to the addressed parameter is
denied because of a system configuration
conflict.
Command Submitted
The command has been transmitted but it
is not possible to know if it has been carried
out.
Unknown Command
The command is unknown.
Read only Parameter
The parameter has an only reading attribute.
Write not allowed
The writing function is not allowed because
of the slave conditions.
Value out of constant limits
The value is out of the constant limits.
State not correct
The control state does not allow the command
to be carried out.
Password
The command has not been carried out be-
cause the password is active.
Type Unknown
The parameter type is unknown.
Hardware Fail
The access is denied because of a hardware
failure.
Checksum Fail
The access is denied because of a checksum
error.
NOK generic
The access is denied because of a non spe-
cified error.