GE Responder 2000, Руководство по обслуживанию

Страница: 39 / 138

SECTION 4: Repair
2025653-048 Revision B Responder
™
2000 Page 39
Assembly Step Details
Install the
Battery Latch
in
the
Base Cover
.
Apply Silicone to the notch
for the AC power plug.
Figure 35: Battery Latch
Figure 36: Silicone Applied
Install the
Base Cover
to
the
Lower Frame
. Using
five Torx security screws
(white arrows).
Note:
Tighten the screws
slowly and evenly to ensure
the rubber tubing is seated
correctly and no wires are
pinched.
When all screws are
tightened, check for any
gaps or bulges in the seal.
Install the two larger Torx
security screws (black
arrows) to hold the
Power
Supply
in place.
Install the four rubber feet if
necessary.
Figure 37: Base Cover
If necessary, check the joint
between the
Lower Frame
and the
Front Body
for
gaps in the silicone. Add
more silicone if necessary.
Figure 38: Front Body and Lower Frame Joint
(with Correctly Applied Silicone)