Gateway E-842R, Руководство пользователя

Страница: 82 / 164

CHAPTER 6: Controller Information www.gateway.com
76
Advanced settings
To access Advanced Settings:
■
Click Advanced Settings in the Configuration tool bar. The ADVANCED
SETTINGS window opens.
The ADVANCED SETTINGS window is divided into three sections; Identity ,
Fault Tolerance , and Host Ports .
Identity
In the Identity section, you can make changes to the Configuration Name ,
assign the configuration the WWN of either controller, and set the LUN for the
controller.
The following are descriptions of the components of the Identity section:
■
Configuration Name - This is the name you assign to the configuration. The
configuration contains all the information that defines the disk arrays,
logical drives, SAN LUN mapping, hot spare drives and controller specific
settings.
If you want to change the configuration name, enter the new name in the
block provided. Click the
APPLY button followed by the CLOSE button.
■
Configuration WWN - This is the controller's WWN reported to the outside
world to identify the configuration.
If a new WWN appears on the list, you may have a configuration WWN on
your system without a controller in the storage system with the same
WWN. For example, if you have one or two controllers in your system with
no configuration (there is no WWN in the Configuration WWN select box,
only Controller 0/1).