Gateway E-842R, Руководство пользователя

Страница: 129 / 164

List of events www.gateway.com
123
A stripe synchronization of a
RAID 5/50 set has
completed. Information
[0xB2D
(2861)] A controller fails or is
powered off during a
RAID 5/50 write
operation. No action necessary.
The configuration has
changed. Information
[0xB2F
(2863)] A change in the
configuration has
occurred. If you are using the
Save Configuration
feature, re-save your
configuration
information. It no
longer matches.
Otherwise, no action is
necessary.
The controller is flushing
the partner’s mirrored
cache to the drives. There
are <
xx > cache entries
totalling < yy > 512-byte
blocks.
Information
[0xB35
(2869)] Failure or removal of
the partner controller. No action necessary.
The controller has
completed flushing the
partner’s mirrored cache to
the drives. Information
[0xB36
(2870)] Completion of
mirrored cache
flushing. No action necessary.
The battery backup unit
attached to the controller is
now functioning correctly. Information
[0xB42
(2882)] Battery charging is
complete. No action necessary.
The controller has been
powered off. Information
[0xB50
(2896)] Removal of the
controller or power. No action necessary.
The controller has been
powered on. Information
[0xB51
(2897)] The controller was
powered on. No action necessary.
The controller self-test was
successfully completed. Information
[0xB52
(2898)] Self-test completion
on startup. No action necessary.
The controller self-test has
failed. Error
[0xB53
(2899)] Self-test failure on
startup. Replace the controller.
The controller's NVRAM has
been reset. Information
[0xB54
(2900)] Occurs first time after
production. No action necessary.
The controller has an invalid
World Wide Name. Error
[0xB55
(2901)] Occurs first time after
production. Contact Customer
Care.
The Event Log has been
cleared. Information
[0xB56
(2902)] The user has cleared
the event log. No action necessary.
The controller has been
reset. Information
[0xB57
(2903)] User initiated a
controller reset. No action necessary.
Controller Events Messages Type [ID] Cause Action