Gateway E-842R, Руководство пользователя

Страница: 57 / 164

Manually configuring a storage solution www.gateway.com
51
To initialize the array:
1
Click the Array Name you want to initialize in the Array section on the Main
window. The Array Information window opens.
2
Click INITIALIZE . You are prompted to enter your password to confirm the
initialization.
3
Enter your password, then click GO . A message tells you the operation was
successful. Click CLOSE to close the message.
4
Click CLOSE on the Array window to return to the Main window. From the
Main window, you can monitor the initialization.
Mousing over the progress bar shows the percent complete for the
initialization progress. The drive member icons of this array change to
animated icons, indicating the array is initializing.
You can stop the initialization process by clicking the STOP link to the right
of the progress bar.
Pausing and resuming the initialization
You can temporarily pause the initialization process, then resume the process
at a later time.
Pausing initialization
To pause the initialization:
■
Click the PAUSE link located to the right and below the progress bar.
The PAUSE link changes to RESUME and the progress bar stops at its last
position.