Gateway E-842R, Руководство пользователя

Страница: 135 / 164

List of events www.gateway.com
129
Controller Port events
These events are related to the host side Controller Port. The type [ID] format
is: Event type name with its associated ID expressed in hexadecimal (decimal)
(displayed in the OS).
(SATA Drives Only)
A drive w/ SN (SAS: w/ WWN)
<
xx xx > (Slot < nn >) has been
removed.
Error
[0xB76
(2934)] A drive w/ WWN < xx
xx > (Slot < nn >,
Enclosure < nn >) has
been removed.
No action necessary.
There was a bad block
during a rebuild on Array
<nn>, Drive <mm>, LBA <xx
xx xx xx xx xx>, Block Count
<xx>. Error
[0xB78
(2936)] A bad block was
detected during the
rebuild operation.
Data loss occurs with
that data stripe. Replace the drive after
rebuilding. Restore the
lost data from a
know-good backup.
Drive & Array Event
Messages
Type [ID] Cause Action
Controller Port Event
Messages
Type [ID] Cause Action
Host Loop 0/1 acquired
Loop ID <
xx > because we
were not able to get Loop ID
<
xx > (as specified in the
controller settings).
Error
[0xB17
(2839)]
[0xB18
(2840)] Address conflict with
either host adapter or
other device on the
same loop. Resolve address
conflict.
A LIP has occurred on Host
loop <
xx >. Reason: < type >,
The LIP was repeated < yy >
times.
Information
[0xB24
(2852)] A LIP was generated so
that a loop port could
acquire a physical
address on an
arbitrated loop.
A LIP was generated by
port ID: <xx> so that
the loop would be
re-initialized.
A LIP was generated
because of a loop
failure.
A LIP was generated by
port ID: <xx> because
of a loop failure. No action necessary.
Host Loop < xx > is now up. Information
[0xB25
(2853)] Loop is becoming
ready. No action necessary.
Host Loop < xx > is down. Information
[0xB26
(2854)] Loop is going down. Check or replace the
cable.