Gateway E-842R, Руководство пользователя

Страница: 141 / 164

List of events www.gateway.com
135
The multicast address is not
configured. No
communication takes place
with other servers. Warning
[0x201 (513)] The setting
MulticastPort is not set
up in the
db/IP.db
file . The setting was
removed or the file
became corrupt.
Open the file <StorView
folder>\
db\IP.db in a
text editor, and add the
following line:
MulticastPort=9191 .
Save the file, start
StorView, then press the
RESCAN button or
restart the StorView
service.
Multicast socket creation
failure: <reason> Warning
[0x202 (514)] StorView could not set
up the necessary
communication paths
to talk to other
StorView Servers. The
specific cause is
specified in the
<reason> appended to
the message. Change the multicast
port used by StorView.
Note that all StorView
servers must
communicate with each
other on the same
multicast port. If the
setting is changed on
one, they must be
changed on all StorView
Servers.
Open the file <StorView
folder>\
db\IP.db in a
text editor, and change
the following line:
MulticastPort=<port
number>
. Save the file,
start StorView, then
press the
RESCAN
button or restart the
StorView service.
Shared memory used for
the Server and the GUI to
communicate could not be
created nor located. Error
[0x301 (769)] StorView tried to
create or locate the
shared memory used
for the Server and
Server CGI script to
communicate. Quit StorView and all
connections accessing
this StorView Server,
wait 1 minute, then
restart them.
A CGI request was initiated
from the GUI but the
associated shared memory
could not be opened. Error
[0x302 (770)] The Server script
creates new shared
memory for the Server
to access parameter
passed from the GUI.
This shared memory
could not be found. Retry request.
Quit StorView and all
connections accessing
this StorView Server,
wait 1 minute, then
restart them.
Restart the system.
A CGI request was initiated
from the GUI but the
associated parameters
could not be located. Error
[0x303 (771)] The Server script
creates new parameter
for the Server to access
parameter passed
from the GUI. This
parameters could not
be found. Retry request.
Quit StorView and all
connections accessing
this StorView Server,
wait 1 minute, then
restart them.
Restart the system.
StorView Server Event
Messages
Type [ID] Cause Action