NetXpress LX & CM-30R Installation & Operation Manual
4
–
Configuration & Operation
Version 1.1
4-46
GatesAir, Inc.
Intraplex Products
Figure 4-39. Add a DiffServ Marking Entry Dialog Box
Move:
Click and hold
while dragging the dialog box as desired
Source IP address:
Type the IP address where the packet originates. This address is used to
classify the IP flow.
Source Subnet mask:
Type the subnet mask for the source IP address. This mask is used to
classify the IP flow.
Destination IP address:
Type the IP address for the packet’s destination.
This address is used to
classify the IP flow.
Destination Subnet mask:
Type the subnet mask for the destination IP address. This mask is
used to classify the IP flow.
TOS value:
Type the DiffServ value: 0 to 63.
Close:
Click this button or
to return to the
DiffServ Marking for Forwarded Packets
page
without creating an entry.
Add Entry:
Click this button to create a DiffServ marking entry.
DiffServ TOS to Priority Mapping
View and edit TOS value priorities on this table (Figure 4-40). To access the table, point to
Networking
|
Class of Service
and click
DiffServ Priority Mapping
.
