NetXpress LX & CM-30R Installation & Operation Manual
4
–
Configuration & Operation
Version 1.1
4-14
GatesAir, Inc.
Intraplex Products
Figure 4-17. Intraplex NetXpress LX Home Page
Home:
The
NetXpress LX
Home
page.
Faults:
Access pages of alarm statistics, history, and definitions, as well as system logging.
System Cfg:
Access system configuration pages to set parameters such as contacts, TDM bus
mapping, system timing, and configuration backups.
Networking:
Access networking parameters pages, such as Ethernet interfaces, forwarding data, and
SNMP statistics.
Streams:
Access the data stream table to view, add, and edit streams.
Performance:
Access system performance pages to view performance information for streams, voice
signaling, Ethernet interfaces, and so forth.
Security:
Access account security settings and IP access tables.
Utilities:
Access the
Ping
Utility
page.
The blank gray slots on the page indicate places for additional channel modules or power supplies. The
populated slots indicate the CM-30R module, other modules, and the power supplies presently on the
NetXpress LX multiplexer. The top of a module slot shows the TDM bus associated with the module
and the SCB address of the module.
Note:
The address shown for each module is the SCB address, not the physical slot address.
Although not necessary, it is a good practice to set the SCB address (via dip switches on the
module) to match the physical slot address in the shelf. The installation section of each
channel module’s Instal
lation and Operation manual gives module-specific dip switch settings.
