GatesAir Intraplex NetXpress LX Скачать руководство пользователя страница 114

Страница: 114 / 163

–

Configuration & Operation

NetXpress LX & CM-30R Installation & Operation Manual

Version 1.1

GatesAir, Inc.

4-65

Intraplex Products

Clear the voice signaling stats:

Click

on the stream row to clear all signaling statistics for that

stream. Click

on the table header to clear all statistics on the table.

4.3.6.3 Ethernet Interface Statistics

–

WAN and LAN

The read-only

Ethernet Interface Statistics

pages (Figure 4-58) show statistics such as packets

received, sent, and discarded and the time elapsed since the interface was last changed. To access the
WAN or LAN statistics point to

Ethernet Interfaces

and click

WAN

LAN

. (These pages have

identical fields, so this section shows only the WAN interface.)

Figure 4-58. Ethernet Interface Statistics Page

–

WAN and LAN

Refresh:

Click

to refresh the browser manually, or click

10s

, or

30s

to automatically refresh

the browser at 5, 10, or 30 second intervals.

Total octets received:

The number of 8-bit units of data received.

Total octets sent:

The number of 8-bit units of data sent.

Unicast packets received:

The number of packets received for this IP address only.

Unicast packets sent:

The number of packets sent to one IP address only.

Non-unicast packets received:

The number of received packets sent to multiple IP addresses

(broadcast or multi-cast).

Non-unicast packets sent:

The number of packets to be sent to multiple IP addresses (broadcast or

multi-cast).

Input packets discarded:

The number of received packets that were discarded.

Output packets discarded:

The number of packets sent that were discarded.

Receive errors:

The number of received packets with errors.

Transmit errors:

The number of transmitted packets with errors.

Unknown protocols received:

The number of protocols received that were not identified.

Interface last change:

The time elapsed since this interface has changed.

Содержание Intraplex NetXpress LX




































































































































































Результаты поиска

Содержание Intraplex NetXpress LX

Отзывы:

Похожие инструкции для Intraplex NetXpress LX

Бренды по названию

Популярные бренды

GatesAir Intraplex NetXpress LX, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Intraplex NetXpress LX

Отзывы:

Похожие инструкции для Intraplex NetXpress LX

Бренды по названию

Популярные бренды