Gaspardo Vitigreen 130, Использование и обслуживание

Страница: 26 / 86

USE AND MAINTENANCE
26
ENGLISH
cod. 19501690
g
Maintenance in safety
53)Do not proceed with maintenance and cleaning if the power
take-off has not been disconnected first, the engine power
off, the hand brake pulled and the tractor blocked with a wooden
block or stone of the right size under the wheels.
54)Periodically check that the bolts and nuts are tight, and if
necessary tighten them again. For this it would be advisable
to use a torque wrench, respecting the values of 53 Nm for
M10 bolts, resistance class 8.8, and 150 Nm for M14 bolts
resistance class 8.8 (Table 1).
55)During assembling, main-tenance, cleaning, fitting, etc., with
the seeding machine raised, place adequate supports under
the equipment as a precaution.
56)The spare parts must correspond to the manufacturer’s
specifications. Use only original spares .
3.0 RULES OF USE
To obtain the best performance from the equipment, carefully
follow what is set out below.
ATTENTION
The following maintenance, adjustment, and work preparation
operations must be performed with the tractor off and locked
firmly in position with the key removed from the dashboard
and the seeder positioned on the ground.
3.1 CONNECTING TO THE SEEDER
The planter can be attached to any implement thanks to the simple
hopper support bar (1 Fig. 10).
Table 1
fig. 8
1
2
3
4