Garmin CIRRUS PERSPECTIVE SR2x, Руководство пилота

Страница: 703 / 752

190-00820-11 Rev. A
Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
687
APPENDIX A
Message Comments
MFD1 DB ERR
– MFD1 Safe Taxi
database error exists.
The MFD and/or PFD detected a fault in the Safe Taxi database. Ensure that the data
card is properly inserted. Replace data card. If problem persists, the system should be
serviced.
PFD1 DB ERR – PFD1 Safe Taxi
database error exists.
MFD1 DB ERR – MFD1 FliteCharts
database error exists.
The MFD detected a fault in the FliteCharts database (optional feature). Ensure the
data card is properly inserted. Replace data card. If problem persists, the system
should be serviced.
MFD1 DB ERR – MFD1 Chartview
database error exists.
The MFD detected a fault in the ChartView database (optional feature). Ensure the
data card is properly inserted. Replace data card. If the problem persists, the system
should be serviced.
MFD1 DB ERR – MFD1 multiple
database errors exists.
The MFD and/or PFD detected a fault in more than one database. If problem persists,
the system should be serviced.
PFD1 DB ERR – PFD1 multiple
database errors exists.
NAV DB UPDATED
– Active
navigation database updated.
System has updated the active navigation database from the standby navigation
database.
NAV1 SERVICE – NAV1 needs service.
Return unit for repair.
A fault has been detected in the NAV1 and/or NAV2 receiver. The receiver may still be
available. The system should be serviced.
NAV2 SERVICE
– NAV2 needs service.
Return unit for repair.
NAV1 RMT XFR
– NAV1 remote
transfer key is stuck.
The remote NAV1 and/or NAV2 transfer switch is stuck in the enabled (or “pressed”)
state. Press the transfer switch again to cycle its operation. If the problem persists,
the system should be serviced.
NAV2 RMT XFR – NAV2 remote
transfer key is stuck.
NON-MAG UNITS – Non-magnetic
NAV ANGLE display units are active.
Navigation angle is not set to MAGNETIC at power-up.
NON WGS84 WPT – Do not use GPS
navigation to [xxxx].
The position of the selected waypoint [xxxx] is not calculated based on the WGS84
map reference datum and may be positioned in error as displayed. Do not use GPS to
navigate to the selected non-WGS84 waypoint.
PFD1 DB ERR – PFD1 Airport
Directory database error exists.
The PFD and/or MFD detected a fault in the Airport Directory database. Ensure the data
card is properly inserted. Replace data card. If problem persists, the system should be
serviced.
MFD1 DB ERR
– MFD1 Airport
Directory database error exists.
PFD1 SERVICE
– PFD1 needs service.
Return unit for repair.
The PFD and/or MFD self-test has detected a problem. The system should be serviced.
MFD1 SERVICE – MFD1 needs
service. Return unit for repair.
PFD1 CONFIG
– PFD1 configuration
error. Config service req’d.
The PFD configuration settings do not match backup configuration memory. The
system should be serviced.