Garmin CIRRUS PERSPECTIVE SR2x, Руководство пилота

Страница: 31 / 752

190-00820-11 Rev. A
Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
15
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
19
SPKR – Selects and deselects the cabin speaker. COM, NAV, AUX, and MKR receiver audio can be heard
on the speaker. Press and hold for 2 seconds for Passenger Address (PA). The SPKR key flashes during
PA.
20
Cursor (CRSR) Control Knob – Turn to move the cursor (flashing white or blue annunciator) to the
desired source.
21
Volume (VOL) Control Knob – Turn the smaller knob to control volume or squelch of the selected source
(indicated by the flashing white or blue annunciator). When the volume control cursor is not active press
to switch to Blue-Select mode. If the volume control cursor is active, press twice (once to cancel the cursor,
twice to activate Blue-Select mode).
22
Bluetooth
®
Connection Annunciator – (GMA 350c only) A flashing blue annunciator indicates the unit is
discoverable. A solid blue annunciator indicates an active Bluetooth connection.
23


Key Annunciator – (GMA 350c only) Assigns the Bluetooth device to the 

audio source. Press
the 

key until the annunciator turns blue. The key annunciator will cycle from OFF to WHITE to
BLUE. WHITE selects the wired audio source and BLUE selects the Bluetooth audio source. NOTE : The
Bluetooth audio can only be assigned to one source at a time. Once the Bluetooth audio is assigned to an
audio source, the remaining entertainment audio sources will only cycle between OFF and WHITE.
24
MUS1 Key Annunciator – (GMA 350c only) Assigns the Bluetooth device to the MUS1 audio source.
Press the MUS1 key until the annunciator turns blue. The key annunciator will cycle from OFF to WHITE
to BLUE. WHITE selects the wired audio source and BLUE selects the Bluetooth audio source. NOTE :
The Bluetooth audio can only be assigned to one source at a time. Once the Bluetooth audio is assigned to
an audio source, the remaining entertainment audio sources will only cycle between OFF and WHITE.
25
MUS2 Key Annunciator – (GMA 350c only) Assigns the Bluetooth device to the MUS2 audio source.
Press the MUS2 key until the annunciator turns blue. The key annunciator will cycle from OFF to WHITE
to BLUE. WHITE selects the wired audio source and BLUE selects the Bluetooth audio source. NOTE :
The Bluetooth audio can only be assigned to one source at a time. Once the Bluetooth audio is assigned to
an audio source, the remaining entertainment audio sources will only cycle between OFF and WHITE.
26
Control Knob Press and Hold – (GMA 350c only) Press and hold for two seconds to enable the GMA 350c
as discoverable for pairing. The Bluetooth Annunciator with flash to indicate that the unit is discoverable.
The unit will remain discoverable for 90 seconds or until a successful pair is established. Once a successful
pair is established, the audio “Bluetooth paired” is played.