Garmin CIRRUS PERSPECTIVE SR2x, Руководство пилота

Страница: 166 / 752

190-00820-11 Rev. A
Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
150
AUDIO PANEL AND CNS
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
With a single COM selected and 3D Audio enabled, the listener hears the audio source at the 12 o’clock
position. If both COMs are selected, the listener hears COM1 at 11 o’clock and COM2 at the 1 o’clock position.
All other intercom positions are processed to sound like their relative seat location. By default, the GMA350
assumes the pilot sits in the left seat. A Garmin authorized service center can make changes to the default
configuration.
e
naBling
3d a
udio
Press and hold the PILOT Key to toggle 3D audio processing on and off for all headset positions. When
3D Audio is enabled, the aural message “3D audio left” is heard in the left ear followed by “3D audio right”
in the right ear. If the aural messages are not heard in only the left and then the right ear respectively, the
cause may be aircraft wiring or headset settings. Refer to the following table if a headset or aircraft wiring
problem is suspected.
3D Audio Troubleshooting
Symptom(s) Cause(s) Solution(s)
“3D audio left” message
heard in both ears.
“3D audio right” message
not heard 1) Mono headset in use 1) Use a stereo headset
2) Stereo headset in use with
mono/stereo switch set to
‘mono’
2) Set mono/stereo switch on headset to ‘stereo’
3) Aircraft wiring has left audio
wired to both left and right
channels of stereo headset jack
3) If after checking solutions #1 and #2 see a service
center as soon as possible to inspect/correct wiring.
This wiring fault can cause fail-safe audio not to
function.