Garmin CIRRUS PERSPECTIVE SR2x, Руководство пилота

Страница: 249 / 752

190-00820-11 Rev. A
Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
233
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
Adding an airway to a flight plan using the FMS Knob:
1)
Press the FPL Key.
2) Press the FMS Knob to activate the cursor (not required on the PFD).
3) Turn the large
FMS
Knob to highlight the waypoint after the desired airway entry point. If this waypoint is not
a valid airway entry point, a valid entry point should be entered at this time.
4) Turn the small FMS Knob one click clockwise and press the LD AIRWY Softkey, or press the MENU Key and
select “Load Airway”. The Select Airway Page is displayed. The
LD AIRWY
Softkey or the “Load Airway” menu
item is available only when a valid airway entry waypoint has been chosen (the waypoint ahead of the cursor
position).
5) Turn the
FMS
Knob to select the desired airway from the list, and press the
ENT
Key. Low altitude airways are
shown first in the list, followed by “all” altitude airways, and then high altitude airways.
6) Turn the
FMS
Knob to select the desired airway exit point from the list, and press the
ENT
Key. ‘LOAD?’ is
highlighted.
7) Press the ENT Key. The system returns to editing the flight plan with the new airway inserted.
Adding an airway to a flight plan using the Quick Select Box:
1) Press the
FPL
Key.
2)
Use the Joystick to place the QuickSelect Box on the waypoint after the desired airway entry point. If this
waypoint is not a valid airway entry point, a valid entry point should be entered at this time.
3) Press the
MENU
Key and select “Load Airway”. The Select Airway Page is displayed.
4)
Turn the FMS Knob to select the desired airway from the list, and press the ENT Key. Low altitude airways are
shown first in the list, followed by “all” altitude airways, and then high altitude airways.
5) Turn the
FMS
Knob to select the desired airway exit point from the list, and press the
ENT
Key. ‘LOAD?’ is
highlighted.
6) Press the ENT Key. The system returns to editing the flight plan with the new airway inserted.