Garmin Cessna Caravan G1000, Руководство по линейному обслуживанию

Страница: 129 / 288

______________________________________________________________________________
____________________________________________________________________________
LMM for the Kodiak 100 Page 4-45
190-02102-00 Rev.4
GIA 1 INOP - VOLT Check GIA voltage. • Cycle power to the GIA.
• Wait 5 minutes before
restoring power to the GIA.
• Check aircraft supply
voltage to the GIA.
• Check for loose
connections, bent
connector pins, or shorts.
• Replace the GIA 64.
GIA1 MANIFEST GIA1 software mismatch. • Load correct software.
GIA1 SERVICE The GIA1 self-test has
detected a problem in the
unit. • Cycle power to the GIA.
• Replace the GIA.
GIA2 CONFIG The GIA2 configuration
settings do not match the
backup configuration
memory. • Reload configuration to the
GIA.
• If the problem persists,
check the configuration
module harness for faults,
and replace if necessary.
GIA2 CONFIG GIA2 has an error in the
audio configuration. • Reload configuration to the
GIA.
• If the problem persists,
check the configuration
module harness for faults,
and replace if necessary.
GIA2 COOLING GIA2 operating
temperature is too low to
operate properly. • Allow the unit to warm up to
normal operating
temperature.
GIA2 COOLING GIA2 has exceeded its
operating temperature
range. • Check the fan, wiring, and
air tubing (if applicable).
• Replace the cooling fan if
not sure it is operating
properly.
• If the problem persists,
replace the GIA.
• If the problem persists,
contact Garmin Aviation
Support for assistance.
Table 4-5. GIA 64W System Messages (Continued)
System Message Cause Recommended Actions
Uncontrolled if Printed