USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 90 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
6.60.1 Module power off.
The command power_off , causing the individual M40GBP module to be powered off.
It enable the user to replace individual M40GBP module while the rest of the M40GBP modules on the
same 1U chassis are powered on up and running.
This command supported only with hardware version 0.3.0.0.11 and up.
6.61 Get/Set Internal VLAN ID
The IBS default internal Vlan Id is :1 .
Using the command set_int_vlan it is possible to set the internal vlan id
To command get_int_vlan_id display the current internal vlan id
M40GBP$ power_off
Shutdown….
IBSG10P set_int_vlan 2
command succeeded.
BS10GP$ get_int_vlan
Internal VLAN: 2
command succeeded.